Views: 0 Author: Site Editor Publish Time: 2026-07-02 Origin: Site
The GFRP rebar production line is based on continuous pultrusion technology. It converts raw glass fibers and thermosetting resin into high-strength composite reinforcement bars.
Unlike conventional metal processing, this system operates continuously with synchronized mechanical and thermal control.
The main objective is to ensure:
Stable fiber alignment
Uniform resin distribution
Consistent curing
Continuous output
A complete GFRP rebar production line includes multiple integrated modules.
Fiber creel rack system
Tension control unit
Resin impregnation system
Pre-forming guide unit
Heated curing die
Pulling machine
Cooling system
Cutting unit
Optional sand coating system
The production process is continuous and fully synchronized.
Fiber loading on creel rack
Fiber tension alignment
Resin impregnation bath
Pre-forming shaping
Heated die curing
Cooling stabilization
Surface treatment (optional sand coating)
Continuous pulling
Automatic cutting
Each step affects final mechanical strength and dimensional accuracy.
| Parameter | Typical Range |
|---|---|
| Production speed | 1 – 6 m/min |
| Diameter range | 4 mm – 40 mm |
| Fiber content | 70% – 80% |
| Curing temperature | 120 – 160°C |
| Tensile strength | 600 – 1200 MPa |
Higher-end systems support stable long-hour continuous operation.
A GFRP rebar production line requires a structured factory layout.
Minimum: 800–1500 m² (small line)
Industrial scale: 1500–3000 m²
Stable power supply (industrial voltage)
Ventilation system (resin handling)
Material storage area
Finished product warehouse
Proper layout improves production stability and safety.
Manual resin control
Basic pulling system
Lower investment cost
Servo-controlled pulling
Automated resin mixing
Integrated cutting system
High consistency output
Automation level directly affects product uniformity and labor cost.
Continuous manufacturing process
Stable mechanical properties
High production efficiency
Reduced labor dependency
Suitable for large-scale industrial output
Corrosion-resistant product output
Products from the production line are used in:
Bridge construction
Marine infrastructure
Chemical plants
Road reinforcement systems
Underground structures
Coastal buildings
These environments require corrosion-resistant reinforcement solutions.
The global demand for GFRP rebar production systems is increasing due to infrastructure modernization and durability requirements.
Replacement of steel reinforcement in corrosive environments
Growth of coastal construction projects
Increasing maintenance cost of steel structures
Adoption of green construction materials
The industry is shifting toward automated composite manufacturing lines.
GTOFRP™ designs integrated production systems focused on stability and scalability.
Key engineering features include:
Precise fiber tension control
Uniform resin impregnation system
Stable thermal curing zone
Modular expansion design
Systems are suitable for both startup factories and industrial-scale production plants.
It is a continuous system that manufactures fiberglass reinforcement bars using pultrusion technology.
Depending on capacity, it requires approximately 800–3000 m² of factory space.
Typical production speed ranges from 1 to 6 meters per minute.
Yes, by changing die systems and adjusting process parameters.
It can be configured as semi-automatic or fully automatic depending on investment level.
The GFRP rebar production line is a continuous industrial system designed for manufacturing high-performance composite reinforcement materials. It integrates fiber reinforcement, resin systems, and thermal curing into a stable automated process suitable for large-scale production.
GTOFRP™ provides scalable production line solutions designed for efficiency, stability, and long-term industrial operation.